Logo

Banner
=> German
English
=> Spanish
=> Russian
=> Chinese
=> Persian
Homepage
News
Products
Repair Project
Worldwide Repairs
Technical Reports
MM-Infos
History
Links
Contact
Impressum

Special Website
www.metalexistence.com
(Iron & steel works, transformers, floating roof tanks, ...)

MultiMetall-Produkte

Accessories

MultiMetall offers the following materials which help using PolymerMetals or which extend the use of PolymerMetals:

Prod-#
Product name
Unit
Description
Product
10
MM-Degreaser Z, liquid
1000 ml
MM-Degreaser Z is an universal solvent for degreasing metallic, plastic and other surfaces. Before the application of PolymerMetals there is mostly a surface preparation of the concerned work piece required to evoke a good bonding between the PolymerMetal and the ground material. Along with those requirements goes the cleaning of the surface. MM-Degreaser Z offers a high degreasing potential against grease and oil, facilitates a wide range of application and can be applied by brush.
MM-Degreaser Z
11
MM-Degreaser Z, liquid
250 ml
14
MM-Release agent, liquid
100 ml
MM-Release agent prevents the adhesion between PolymerMetals and the surface of the base material. MM-Release agent can e.g. be applied by brush.
MM-Release agent
33
Mixing plate (synthetic material)
20 x 12 cm
The mixing plate is suitable as useful and Die Mischplatte eignet sich als praktische und handy working substrate to strike out the mixed components before applying them on the final work piece which shall be coated.
Mixing plate (#33)
16
Mixing stick (stainless steel)
pc
Useful tool for taking pasty or soft-pasty components out of the tins, for mixing the components e.g. within the mixing cup and for applying the mixture on the workpiece.
Mixing stick (#16)
15
Mixing cup (synthetic material)
pc
Small (Oneway)-Container to mix two components.
Mixing stick (#15)
25
Measuring spoon red
set
Finding the right mixing ratio for smaller portions whenever Hardener red is envolved. The bigger spoon is used for the base component and the smaller one for the Hardener red. Spoons must always be filled levelled.
Measuring spoon red (#25)
26
Measuring spoon yellow
set
Finding the right mixing ratio for smaller portions whenever Hardener yellow, XETEX BD or Molymetall is envolved. The bigger spoon is used for the base component and the smaller one for the Hardener component. Spoons must always be filled levelled.
Measuring spoon yellow (#26)
29
Measuring spoon VP 10-500
set
Useful for smaller portions of VP 10-500. Spoons must always be filled levelled.
Measuring spoon VP 10-500 (#29)
18
Fabric tape (stainless steel)
100 x 10 cm
Fabric tapes and mats increase the stability and strength of a repair area when combined with PolymerMetals. In addition, with the help of fabric tapes and mats, PolymerMetals can be applied to areas where otherwise this wouldn’t be possible due to missing supporting surfaces (e.g. larger leakages or cracks).
Fabric tape (stainless steel) (#18)
20
Fabric tape (glass fibre)
1000 x 5 cm
Fabric tape (glass fibre) (#20)
22
Fabric mat (glass fibre)
30 x 40 cm
Fabric mat (glass fibre) (#22)
23
Application roller
pc
Can be used to spread the coating material evenly on to the fabric mats or tapes and to massage it in. At the same time troubling air pockets in the even soft PolymerMetal are avoided / removed.
Application roller (#23)
34
Temperature indicator (one-way)
15 pc
These self adhesive one-way measuring temperature indicators are only used together with the hot-hardening material VP 10-500 and they help to indicate the maximum temperature of ~ 150 °C, when VP 10-500 should be applied.
Temperature indicator (one-way) (#34)

Detailed information can be received from our technical data sheets, which are available for the accessories MM-Degreaser Z, MM-Release agent, Fabric tape - & mat and which can be requested by using the contact form. For the rest of the accessories we don't publish any technical data sheets. Information about their handling are explained in the technical data sheets of our materials.



MultiMetall® • PolymerMetall® • Ceramium® • Molymetall® • Sealium® • XETEX® • the MetalExistenceCompany®