| TEC |
|
Used
products |
 |
 |
| 001 |
Wear
behaviour of polymer materials |
Ceramium, VP
10-017, MM-Elastomer |
 |
|
| 003 |
Laboratory test behaviour of VP 10-500 in liquid medium at 300 °C |
VP
10-500 |
|
|
| 004 |
Pending
peeling test according to "Trietsch" |
MM-Elastomer |
|
|
| 005 |
Test
of the compression-shear-strength after injection |
MM-metal
UW |
|
|
| 006 |
Microscope
photographs, direct-MM-bonding, bonding on contaminated surfaces,
pressure tight tests |
MM-metal
oL-steelceramic |
|
|
| 007 |
The
corrosion-chemical behaviour of PolymerMetals in combination
with casting materials |
MM-metal
SS-steelceramic, MM-metal
SQ, MM-metal
SS-steel 382, MM-metal
SS-steel, MM-metal
UW, Ceramium, MM-metal
S-steel |
|
|
| 008 |
Repair
of a shaft with PolymerMetals |
MM-metal
SS-steelceramic, MM-metal
SS-steel 382, MM-metal
SS-"product group", Ceramium, Molymetall |
|
|
| 012 |
Pressure
tightness test |
MM-metal
UW |
|
|
| 013 |
Wear
tests |
MM-metal
SS-steelceramic, Ceramium |
|
|
| 015 |
Compression
strain test |
MM-Elastomer |
|
|
| 016 |
Sample
applications |
PolymerMetals |
|
|
| 017 |
Elimination
of oil leaks from electrical components like transformers, shunt
reactors, transducers, etc. |
MM-metal
oL-steelceramic, MM-Elastomer |
|
|
| 018 |
Adhesion
test |
MM-metal
SS-steel |
|
|
| 019 |
Injection
of Polymermetal |
MM-metal
SS-steel 382, MM-metal
SS-steel, Ceramium |
|
|
| 022 |
Scanning
electron microscope records |
PolymerMetals |
|
|
| 023 |
Comparison
compressive strength |
MM-metal
SS-steel 382, MM-metal
SS-steel |
|
|
| 026 |
Adhesion & elasticity |
MM-Elastomer
95 |
|
|
| 027 |
Examination
of shearing strength |
MM-metal
SS-steel 382 |
|
|
| 028 |
Surface
preparation before the coating of hydraulic rams |
Molymetall |
|
|
| 029 |
Pressure
tight test at low temperatures |
MM-metal
SS-steelceramic |
|
|
| 030 |
High
stress due to temperature, chemicals (aggressive lye) and erosion
affecting at the same time |
Ceramium |
|
|
